The Harris Products Group - Brazing, Soldering & Welding

Welcome To
The Harris Products Group

COMPANY

EQUIPMENT

ALLOYS

SALES

INTERNATIONAL

SUPPORT

ALLOYS

STAINLESS STEEL SOLID WIRE FOR GMAW (MIG) & GTAW (TIG)

17-4PH (630) The composition of this filler metal is designed primarily for welding ASTM A564 Type 630 and some other precipitation-hardening stainless steels.	ER308 Most frequently used for base metals of similar composition.
ER308L Similar usage as the above, but the 0.03% maximum carbon content increases resistance to intergranular corrosion.	ER308LSi Similar usage as the above, but the 0.65-1.00% silicon content improves wash and wetting behavior in the gas shielded welding processes.
ER309 Used for welding similar alloys in wrought or cast form; occasionally used for welding 18-8 base metals when severe corrosion conditions exist; and, at times, welding dissimilar steels.	ER309L Similar usage as 309 bare, but the 0.03% maximum carbon content increases resistance to intergranular corrosion.
ER309LSi Similar usage as the above, but the 0.65-1.00% silicon content improves wash and wetting behavior in the gas shielded welding processes.	ER310 Similar usage as the above, but the 0.65-1.00% silicon content improves wash and wetting behavior in the gas shielded welding processes.
ER312 Most frequently used to weld base metals of similar composition.	ER316 Usually used for welding similar alloys (containing about 2% molybdenum); also for high temperature service applications.
ER316L Used principally for welding molybdenum-bearing austenitic alloys containing 0.03% maximum carbon.	ER316LSi Similar usage as the above, but the 0.65-1.00% silicon content improves wash and wetting behavior in the gas shielded welding processes.
ER317L The alloy content is somewhat higher than for ER 316,particularly in molybdenum. The maximum 0.03% carbon content increases resistance to integranular corrosion due to carbide precipitation.Severe corrosion resistance to sulfuric and sulfurous acids and their salts.	ER347 A stabilized 18-8, 19-9 alloy that is not subject to intergranular corrosion due to carbide precipitation.
ER410 Used for welding alloys of similar compositions; also for overlays on carbon steels to resist corrosion, erosion or abrasion. Usually requires preheat and postheat treatments.

Chemical Composition (%):

Product	C	Mn	Si	S	P	Cr	Ni	Mo	Cu	Cb & Ta	Fe
ER308	0.08	1.0 - 2.5	0.30 - 0.65	0.03	0.03	19.5 - 22.0	9.0 - 11.0	0.75	0.75	-	Rem.
ER308L	0.03	1.0 - 2.5	0.30 - 0.65	0.03	0.03	19.5 - 22.0	9.0 - 11.0	0.75	0.75	-	Rem.
ER308LSi	0.03	1.0 - 2.5	0.65 - 1.00	0.03	0.03	19.5 - 22.0	9.0 - 11.0	0.75	0.75	-	Rem.
ER309	0.12	1.0 - 2.5	0.30 - 0.65	0.03	0.03	23.0 - 25.0	12.0 - 14.0	0.75	0.75	-	Rem.
ER309L	0.03	1.0 - 2.5	0.30 - 0.65	0.03	0.03	23.0 - 25.0	12.0 - 14.0	0.75	0.75	-	Rem.
ER309LSi	0.03	1.0 - 2.5	0.65 - 1.00	0.03	0.03	23.0 - 25.0	12.0 - 14.0	0.75	0.75	-	Rem.
ER310	0.08 - 0.15	1.0 - 2.5	0.30 - 0.65	0.03	0.03	25.0 - 28.0	20.0 - 22.5	0.75	0.75	-	Rem.
ER312	0.15	1.0 - 2.5	0.30 - 0.65	0.03	0.03	28.0 - 32.0	8.0 - 10.5	0.75	0.75	-	Rem.
ER312	0.15	1.0 - 2.5	0.30 - 0.65	0.03	0.03	28.0 - 32.0	8.0 - 10.5	0.75	0.75	-	Rem.
ER316	0.08	1.0 - 2.5	0.30 - 0.65	0.03	0.03	18.0 - 20.0	11.0 - 14.0	2.0 - 3.0	0.75	-	Rem.
ER316L	0.03	1.0 - 2.5	0.30 - 0.65	0.03	0.03	18.0 - 20.0	11.0 - 14.0	2.0 - 3.0	0.75	-	Rem.
ER316LSi	0.03	1.0 - 2.5	0.65 - 1.00	0.03	0.03	18.0 - 20.0	11.0 - 14.0	2.0 - 3.0	0.75	-	Rem.
ER317L	0.03	1.0 - 2.5	0.30 - 0.65	0.03	0.03	18.5 - 20.5	13.0 - 15.0	3.0 - 4.0	0.75	-	Rem.
ER317L	0.03	1.0 - 2.5	0.30 - 0.65	0.03	0.03	18.5 - 20.5	13.0 - 15.0	3.0 - 4.0	0.75	-	Rem.
ER347	0.08	1.0 - 2.5	0.30 - 0.65	0.03	0.03	19.0 - 21.5	9.0 - 11.0	0.75	0.75	10xCmin - 1.0max	Rem.
ER410	0.12	0.6	0.5	0.03	0.03	11.5 - 13.5	0.6	0.75	0.75	-	Rem.
ER630	0.05	0.25 - 0.75	0.75	0.03	0.03	16.0 - 16.75	4.5 - 5.0	0.75	3.25 - 4.00	0.15 - 0.30	Rem.

GMAW (MIG), Short Circulating Transfer: 90% helium + 7.5% argon + 2.5% CO 2 has no effect on corrosion resistance; provides small heat-affected zone; no undercutting; and minimum distortion.

Wire Size	Welding Current (Amps)	Arc Voltage	Wire Feed Speed, ipm
0.045"	100 - 200	17 - 22	100 - 240
0.035"	75 - 160	17 - 22	120 - 400
0.030"	60 - 125	17 - 22	150 - 430
0.045"	100 - 200	17 - 22	100 - 240
0.035"	75 - 160	17 - 22	120 - 400
0.030"	60 - 125	17 - 22	150 - 430

GMAW (MIG), Spray Transfer: 99% argon - 1% oxygen is predominantly used. This mixture improves arc stability; produces a more fluid and controllable weld puddle with good bead contour. Undercutting is minimized on heavier sections. 98% argon - 2% oxygen provides better arc stability and welding speed than the 1% oxygen mixture for thinner stainless steel materials.

Wire Size	Welding Current (Amps)	Arc Voltage	Wire Feed Speed, ipm
3/32"	250 - 600	24 - 32	50 - 80
1/16"	220 - 500	24 - 32	110 - 210
0.045"	200 - 450	24 - 30	220 - 400
0.035"	180 - 300	24 - 29	430 - 500
0.030"	160 - 225	24 - 28	440 - 650
3/32"	250 - 600	24 - 32	50 - 80
1/16"	220 - 500	24 - 32	110 - 210
0.045"	200 - 450	24 - 30	220 - 400
0.035"	180 - 300	24 - 29	430 - 500
0.030"	160 - 225	24 - 28	440 - 650

GTAW (TIG): Argon is suggested for thickness up to 1/2�. For thicker sections, argon-helium mixtures or pure helium may be used for deeper penetration. Argon-hydrogen mixtures are occasionally used to improve bead shape and wettability

Material Thickness	Wire Size	Welding Current (Amps)	Gas Cup	Argon, cfh	Tungsten, Thoriated
1/2"	1/8"	235 - 375	1/2"	25	1/8"
1/4"	1/8"	200 - 350	1/2"	25	1/8"
3/16"	3/32"	150 - 250	7/16"	25	3/32"
1/8"	1/16"	120 - 150	7/16"	20	3/32"
3/32"	1/16"	100 - 130	3/8"	20	1/16"
1/16"	1/16"	80 - 120	3/8"	20	1/16"

Material Thickness	Wire Size	Welding Current (Amps)	Gas Cup	Argon, cfh	Tungsten, Thoriated
1/2"	1/8"	235 - 375	1/2"	25	1/8"
1/4"	1/8"	200 - 350	1/2"	25	1/8"
3/16"	3/32"	150 - 250	7/16"	25	3/32"
1/8"	1/16"	120 - 150	7/16"	20	3/32"
3/32"	1/16"	100 - 130	3/8"	20	1/16"
1/16"	1/16"	80 - 120	3/8"	20	1/16"

Stock Numbers and Sizes:

Alloy	Stock Number	Size	Weight	Metric
MIG 308-309-310-312-316	00310H8	310 .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	00308E2	308 .030 (.762mm) X 2# S/S SP	2lb.	.90kg.
	00308E5	308 .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	00308E8	308 .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	00308F2	308 .035 (.88mm) X 2# S/S SP	2lb.	.90kg.
	00308F5	308 .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	00308F8	308 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	00308H8	308 .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	00309F8	309 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	0030815	308 .025 (.635mm) X 10# S/S SP	10lb.	4.53kg
	00310F8	310 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	00316E8	316 .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	00312F8	312 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	00312H8	312 .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	00316F5	316 .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	00347E8	347 .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	00347F8	347 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	00347H8	347 .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	00410F8	410 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	00410H8	410 .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	0030812	308 .025 (.635mm) X 2# S/S SP	2lb.	.90kg.
	00309H8	309 .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	00316F8	316 .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
MIG 308L-309L-316L	0309LH8	309L .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	0308L18	308L .025 (.635mm) X 25# S/S SP	25lb.	11.34kg
	0308LE5	308L .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	0308LF2	308L .035 (.88mm) X 2# S/S SP	2lb.	.90kg.
	0308LF5	308L .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	0308LF8	308L .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	0308LH8	308L .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	0309LE2	309L .030 (.762mm) X 2# S/S SP	2lb.	.90kg.
	0309LE5	309L .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	0309LF2	309L .035 (.88mm) X 2# S/S SP	2lb.	.90kg.
	0308L15	308L .025 (.635mm) X 10# S/S SP	10lb.	4.53kg
	0309LF8	309L .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	0308LE2	308L .030 (.762mm) X 2# S/S SP	2lb.	.90kg.
	0316L12	316L .025 (.635mm) X 2# S/S SP	2lb.	.90kg.
	0316L15	316L .025 (.635mm) X 10# S/S SP	10lb.	4.53kg
	0316LE2	316L .030 (.762mm) X 2# S/S SP	2lb.	.90kg.
	0316LE5	316L .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	0316LE8	316L .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	0316LF2	316L .035 (.88mm) X 2# S/S SP	2lb.	.90kg.
	0316LF5	316L .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	0316LF8	316L .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	0316LH8	316L .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	0316L38	316L 1/16 (1.6mm) X 25# S/S SP	25lb.	11.34kg
	0317LF8	317L .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	0309LF5	309L .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	0308LE8	308L .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	0308L12	308L .025 (.635mm) X 2# S/S SP	2lb.	.90kg.
MIG 308LSI-309LSI-316LSI	309LSE8	309LSI .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	308LS15	308LSI .025 (.635mm) X 10# S/S SP	10lb.	4.53kg
	308LS12	308LSI .025 (.635mm) X 2# S/S SP	2lb.	.90kg.
	308LSE2	308LSI .030 (.762mm) X 2# S/S SP	2lb.	.90kg.
	308LSE5	308LSI .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	308LSE8	308LSI .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	308LSF2	308LSI .035 (.88mm) X 2# S/S SP	2lb.	.90kg.
	316LSH8	316LSI .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	308LSF5	308LSI .035 (.88mm) X10# S/S SP	10lb.	4.53kg
	316LS38	316LSI 1/16 (1.58mm) X 25# S/S SP	25lb.	11.34kg
	308LSF8	308LSI .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	308LS38	308LSI 1/6 (1.6mm) X 25# S/S SP	25lb.	11.34kg
	316LSE5	316LSI .030 (.762mm) X 10# S/S SP	10lb.	4.53kg
	316LSF8	316LSI .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	308LS18	308LSI .025 (.635mm) X 25# S/S SP	25lb.	11.34kg
	316LSF5	316LSI .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	308LSH8	308LSI .045 (1.43mm) X 25# S/S SP	25lb.	11.34kg
	316LSE8	316LSI .030 (.762mm) X 25# S/S SP	25lb.	11.34kg
	309LSF5	309LSI .035 (.88mm) X 10# S/S SP	10lb.	4.53kg
	316LSE2	316LSI .030 (.762mm) X 2# S/S SP	2lb.	.90kg.
	316LS18	316LSI .025 (.635mm) X 25# S/S SP	25lb.	11.34kg
	316LS15	316LSI .025 (.635mm) X 10# S/S SP	10lb.	4.53kg
	309LSH8	309LSI .045 (1.14mm) X 25# S/S SP	25lb.	11.34kg
	309LSF8	309LSI .035 (.88mm) X 25# S/S SP	25lb.	11.34kg
	316LSF2	316LSI .035 (.88mm) X 2# S/S SP	2lb.	.90kg.
TIG 308-309-310-312-316-347-410	0308T50	308 3/32 (2.38mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0316T50	316 3/32 (2.38mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0308TE0	308 .030 (.762mm) X 36 (914mm) S/S
	0308TF0	308 .035 (.88mm) X 36 (914mm) S/S
	0308TH0	308 .045 (1.14mm) X 36 (914mm) S/S
	0308T30	308 1/16 (1.6mm) X 36 (914mm) S/S
	0410T30	410 1/16 (1.6mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0316TH0	316 .045 (1.14mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0308T60	308 1/8 (3.17mm) X 36 (914mm) S/S
	174PH50	ER630 (174PH) 3/32 (2.3mm) X 36 (914mm) S/S
	174PH30	ER630 (174PH) 1/16 (1.6mm) X 36 (914mm) S/S
	0410T50	410 3/32 (2.38mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0347T60	347 1/8 (3.17mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0347T50	347 3/32 (2.38mm) X 36 (914mm) S/S
	0347T30	347 1/16 (1.58mm) X 36 (914mm) S/S
	0347TH0	347 .045 (1.14mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0347TF0	347 .035 (.88mm) X 36 (914mm) S/S
	0316T60	316 1/8 (3.17mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0309T50	309 3/32 (2.38mm) X S/S
	0308T70	308 5/32 (3.96mm) X 36 (914mm) S/S
	174PH
	0316T30	316 1/16 (1.5mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0309T30	309 1/16 (1.6mm) X 36 (914mm) S/S
	0308T80	308 3/16 (4.76mm) X 36 (914mm) S/S
	0309T60	309 1/8 (3.17mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0310T30	310 1/16 (1.6mm) X 36 (914mm) S/S
	0310T50	310 3/32 (2.38mm) X 36 (914mm) S/S
	0312T30	312 1/16 (1.6mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0312T50	312 3/32 (2.38mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	0312T60	312 1/8 (3.17mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
TIG 308L-308LSI-309L-316L-316LSI-317L	316LTH0	316L .045 (1.14mm) X 36 (914mm) S/S
	316ST30	316LSI 1/16 (1.6mm) X 36 (914mm) S/S
	316LT50	316L 3/32 (2.38mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	316LT60	316L 1/8 (3.17mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	316LT70	316L 5/32 (3.96mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	316LT80	316L 3/16 (4.76mm) X 36 (914mm) S/S
	316LT30	316L 1/16 (1.6mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	316ST50	316LSI 3/32 (2.38mm) X 36 (914mm) S/S
	316ST60	316LSI 1/8 (3.17mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	317LT30	317L 1/16 (1.6mm) X 36 (914mm) SS 10# PKG	10lb.	4.53kg
	317LT60	317L 1/8 (3.17mm) X 36 (914mm) S/S
	317LT70	317L 5/32 (3.96mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	316LTF0	316L .035 (.88mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	308LT30	308L 1/16 (1.6mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	317LT50	317L 3/32 (2.38mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	308ST50	308LSI 3/32 (2.38mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	308LTE0	308L .030 (.762mm) X 36 (914mm) S/S
	308LTF0	308L .035 (.88mm) X 36 (914mm) S/S
	308LTH0	308L .045 (1.14mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	308LT50	308L 3/32 (2.38mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	308LT70	308L 5/32 (3.96mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	308LT60	308L 1/8 (3.17mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	308ST30	308LSI 1/16 (1.6mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	316LTE0	316L .030 (.762mm) X 36 (914mm) S/S
	308ST60	308LSI 1/8 (3.17mm) X 36 (914mm) S/S 10# PKGS	10lb.	4.53kg
	309LTH0	309L .045 (1.14mm) X 36 (914mm) S/S
	309LT30	309L 1/16 (1.6mm)X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	309LT50	309L 3/32 (2.38mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	309LT60	309L 1/8 (3.17mm) X 36 (914mm) S/S 10# PKG	10lb.	4.53kg
	309LT70	309L 5/32 (3.96mm) X 36 (914mm) S/S
	308LT80	308L 3/16 X 36 (914mm) S/S 10# PKG	10lb.	4.53kg

The Harris Products Group

4501 Quality Place

Mason, OH 45040-1971