Alloy 5356
PN: 05356E1POP




Where to buy this product


Alloy 5356 (MIG)

Description: Aluminum Welding Alloy

Alloy 5356 is an all position non - heat treatable MIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire. It is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats/ships, bicycles, trucks, pressure vessels and automotive parts.

Welding
  • Part NumberSize
    05356E1.030" (.762mm) 1# (.45kg) Spool
    05356E5.030" (.762mm)) 5# (2.26kg) Spool  Special Order
    05356E6.030" (.762mm) 12# (5.44kg.) Spool
    05356F1.035" (.88mm ) 1# (.45kg) Spool
    05356F5.035" (.88mm ) 5# (2.26kg) Spool
    05356F6.035" (.88mm) 16# (7.25kg) Spool
    05356213/64" (1.18mm) 1# (.45kg) Spool
    05356253/64" (1.18mm) 5# (2.26kg) Spool
    05356273/64" - (1.18mm ) 16# (7.25kg) Spool
    05356293/64" - (1.18mm) 20# (9.07kg) Spool
    0535621D3/64" - (1.18mm) 150# (67.5kg) Production Pak
    05356371/16" - (1.6mm) 16# (7.25kg) Spool
    05356391/16" - (1.6mm ) 20# (9.07kg) Spool  Special Order
    05356E1POP.030” 1# Spool
    05356F1POP.035” 1# Spool
    0535621POP3/64” - 1# Spool
    0535631POP1/16” - 1# Spool
    Click Part Number to view its Typical Certificate
  • Chemical CompositionAWSCommercial Specification
    Si - 0.25%
    Fe - 0.4%
    Cu - 0.1%
    Mn - 0.05-0.2%
    Mg - 4.5-5.5%
    Cr - 0.05-0.2%
    Zn - 0.1%
    Ti - 0.06-0.2%
    Al - Rem%
    Others - 0.15%
    AWS A5.10; ASME SFA 5.10; ISO 18273UNS-A95356
  • Welding ParametersSpec Sheet