Detalles
Punta de corte de máquina de gas natural u oxipropano de alta velocidad modelo 6290-VVC con una carcasa de latón cromado (profundidad de copa de 0,088).Esta punta maximiza el corte a la vez que aumenta la velocidad de corte para reducir la entrada de calor. La punta produce cortes de alta calidad y así reduce el trabajo posterior. La punta 6290-VVC se usa con gases combustibles de bajo costo.
Características
- Punta de corte mecánico de dos piezas
- Carcasa exterior de latón cromado con carcasa interior de latón (profundidad de copa de 0.088)
- Para usar con gases combustibles alternativos de bajo costo: propano/gas natural (NO PARA USAR CON ACETILENO)
- Minimiza el corte
- El aumento de la velocidad de corte reduce la entrada de calor
- High quality cuts, reduce afterwork
- For use with low cost alternate fuel gases - propane/natural gas NOT FOR USE WITH ACETYLENE
- Typical applications include hand cutting, machine cutting, fabrication, shipbuilding, etc.
- Engraved with model number and tip size for easy identification
- One year manufacturer warranty
Información de garantía
- 1 Year
Qué está incluido
- Model 6290-3VVC premium machine cutting tip for use with propane/natural gas
Especificaciones
Equipment
| Compatible Torch Model Number | 98-6E 98-6F |
| Construction | Two-piece - Electroless nickel-plated (outer shell) and Brass (inner shell) |
| Cutting Oxygen Consumption SCFH | 425 |
| Cutting Oxygen PSIG | 100 |
| Cutting Speed (IPM) | 5 |
| Gas / Gas Service | Natural Gas Propane |
| Kerf (Approx.) in. | 0.16 |
| Low Preheat Oxygen Consumption SCFH | 25 - 40 |
| Material Thickness | 6 in. (152.4mm) |
| Natural Gas Consumption SCFH | 20 |
| Preheat Fuel Gas PSIG | 4 oz. - 2 lbs. |
| Preheat Oxygen PSIG - High Pressure | 40 |
| Preheat Oxygen PSIG - Low Pressure | 30 |
| Propane Consumption SCFH | 8 |
| Recommended Items/Accessories | Deluxe Two-Piece Tip Cleaner - Model E-9 - PN 9000160 |
| Special Instructions | Use next size larger tip with same PSIG for contour or intricate cutting For thin plate cutting use a highly carburizing preheat flame Cutting oxygen pressures should be measured at torch entry When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG |
| Style | Machine cutting |
| Tip Size / Number | 3 |
| Typical Application | Machine cutting Demolition Fabrication Maintenance Shipbuilding |
Garantía
| Garantía | 1 Year |