Detalles
El modelo 6290-VVCP es una punta de corte de máquina de oxipropileno de alta velocidad con una carcasa de latón cromado (profundidad de copa 0,034). Esta punta maximiza el corte a la vez que aumenta la velocidad de corte para reducir la entrada de calor. La punta produce cortes de alta calidad y así reduce el trabajo posterior. La punta 6290-VVCP se usa con gases combustibles de bajo costo.
Características
- Punta de corte mecánico de dos piezas
- Carcasa exterior de latón cromado con carcasa interior de latón (profundidad de copa de 0.034)
- Para uso con gases combustibles alternativos de bajo costo: propileno (NO PARA USO CON ACETILENO)
- Minimiza el corte
- Las velocidades de corte aumentadas reducen la entrada de calor
- High quality cuts reduce afterwork
- For use with low cost alternate fuel gases - propylene NOT FOR USE WITH ACETYLENE
- Typical applications include hand cutting, machine cutting, fabrication, shipbuilding, etc.
- Engraved with model number and tip size for easy identification
- One year manufacturer warranty
Información de garantía
- 1 Year
Qué está incluido
- Model 6290-0000VVCP premium machine cutting tip for use with propylene-based fuel gases
Especificaciones
Equipment
| Compatible Torch Model Number | 98-6E 98-6F |
| Construction | Two-piece - Electroless nickel-plated (outer shell) and Brass (inner shell) |
| Cutting Oxygen Consumption SCFH | 40 |
| Cutting Oxygen PSIG | 50 |
| Cutting Speed (IPM) | 20 |
| Gas / Gas Service | Propylene |
| Kerf (Approx.) in. | 0.06 |
| Low Preheat Oxygen Consumption SCFH | 32 |
| Material Thickness | 1/4 in. (6.4mm) |
| Preheat Fuel Gas PSIG | 4 oz. - 2 lbs. |
| Preheat Oxygen PSIG - High Pressure | 12 |
| Preheat Oxygen PSIG - Low Pressure | 8 |
| Propylene Consumption SCFH | 13 |
| Recommended Items/Accessories | Deluxe Two-Piece Tip Cleaner - Model E-9 - PN 9000160 |
| Special Instructions | Use next size larger tip with same PSIG for contour or intricate cutting For thin plate cutting use a highly carburizing preheat flame Cutting oxygen pressures should be measured at torch entry When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG |
| Style | Machine cutting |
| Tip Size / Number | 0000 |
| Typical Application | Machine cutting Demolition Fabrication Maintenance Shipbuilding |
Garantía
| Garantía | 1 Year |